Lighting in Unreal: What We Learned
Status: 6 November 2026. Working notes from the Unreal proof of concept; they will grow as the lighting is tuned.
Summary
- The museum is lit live. Every light is calculated while you look at it; nothing is pre-baked yet. That keeps changes instant while the design is still moving.
- The Blender lighting carries over faithfully. All 232 museum lights arrive in Unreal with the same brightness, colour and beam shape. Unreal’s reference renderer lands within a few percent of the Blender images.
- Real-time lighting is close, not yet equal. It is about 5–10 % darker than the reference, with softer floor reflections. Tuning this is the next step.
- One real-time shortcut flickered in the film. The feature Unreal uses to draw many lights cheaply caused brief dark patches when the camera moved. The walkthrough film was rendered without it and is clean. The live walk-through still uses it, so it needs its own test.
How the museum is lit
| Part | What it does |
|---|---|
| Gallery lights (spots, track heads, wall washes) | 232 lights copied from the Blender design. Each keeps its brightness, colour temperature and beam pattern, using the same light profile files (the files that describe a real fixture’s beam). |
| Sun and sky | One sun for the daylight through the windows and the rotunda dome, and the sky for the soft daylight fill. |
| Bounce light (Lumen) | Unreal’s system for light that bounces off walls and floors, and for reflections in the polished stone. |
| Many-lights shortcut (MegaLights) | Lets Unreal draw hundreds of lights quickly by sampling a few of them per pixel and smoothing the result over time. |
| Camera exposure | Fixed, like a photographer’s manual setting, so rooms do not brighten or darken as you walk. |
How close it is to the Blender design
We rendered every room from the same camera positions as the Blender images, in three ways: Blender, Unreal real time, and Unreal’s slow reference renderer (its path tracer). Average brightness in Gallery 1 (0 = black, 255 = white):
| Area | Blender | Unreal reference | Unreal real time |
|---|---|---|---|
| Large painting, left | 121 | 127 | 114 |
| Middle painting | 177 | 184 | 170 |
| Charcoal wall | 102 | 104 | 98 |
| Stone floor | 129 | 130 | 132 |
| Floor reflections | 132 | 136 | 125 |
| Ceiling | 108 | 117 | 103 |
The images for every room are on the Unreal Engine proof of concept page.
What the walkthrough film taught us
The walkthrough film is made frame by frame with Unreal’s movie renderer. In the first renders, dark rectangular patches appeared on the charcoal walls for a single frame at a time, at random moments, while the camera moved. They were faint but visible, and up to 13 % darker in a small area.
We measured one 8-second shot frame by frame and tried each possible cause in turn:
| What we changed | Result |
|---|---|
| Bounce-light, reflection, shadow and exposure settings | No change |
| Several adjustments to the many-lights shortcut, including a 16× quality mode (4× slower) | Smaller patches, still visible |
| Many-lights shortcut switched off for the film | Clean. The picture is otherwise the same. |
Three independent AI reviewers checked the findings against Unreal’s source code and Epic’s documentation and came to the same conclusion. Without the shortcut, Unreal calculates every light the standard way, which is slower but exact. That suits a film, where each frame can take its time.
What this means for the project
- Films and stills: rendered without the shortcut, so they are clean.
- Live walk-through: visitors’ computers need the shortcut to keep the frame rate up, so the patches could appear there too. We will test the live walk-through on its own, and if they show, look at other ways to draw the lights quickly, such as pre-baked lighting.
Next steps
- Close the real-time gap. Match the real-time brightness, corner light and floor reflections to the reference, room by room.
- Apply the photographic look. Bring the warm colour grade of the Blender renders into Unreal.
- Test the live walk-through. Frame rate, smoothness and whether the light patches appear.
- Lighting for the artists’ wall spots. Each spot keeps its own aimed light; only the artwork changes.
- Later: pre-baked lighting. A lighter version with precomputed lighting for headsets and lower-end computers.